The AGP slot is used to install a graphics card. It allows user to manually enter the number of cylinders, heads, and sectors per track for the drive. Connector FDD connector pin floppy see p. Do not over-tighten the screws! If you already have a password, you must enter your current password first in order to create a new password.
|Date Added:||15 August 2006|
|File Size:||53.18 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
ASRock K7VT2 – motherboard – ATX – Socket A – KT266A
If automatic detection fails, this may due to the hard disk is too old or too new. Select Parallel Port address or asrlck Parallel Port.
This mode speeds up the boot-up routine by skipping memory retestings. Use this to set addresses for the onboard serial ports or disable Serial Ports. Incorrect settings may cause the system to asrkck to recognize the installed hard disk. Chapter 1 and 2 of this manual contain introduction of the motherboard and step-by-step installation guide for new DIY system builders.
Asrock K7VT2 V2.01 Motherboard socket A 462 KT266A AGP 5x PCI LAN Sound USB IDE
It is a menu-driven program, which means you can scroll through its various submenus and make your selections among the predetermined choices. Please make sure to disconnect power supply before adding or removing DIMMs or the system components.
Select mode for the IR transmission port. Make sure to unplug the power cord before installing or removing the motherboard.
Sector This field configures the number of sectors per track. Use this to select Midi IRQ. Use keys to move between the Hour, Minute and Second fields. Select [Auto] will enable this feature if the system supports it. Keep the screw for later use. You can also restart by turning the system off and then back on. Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by Asrkck.
It refers to a section of the PCI memory address range used for graphics memory. The motherboard detects the memory module s inserted and automatically assigns appropriate frequency. Remove the system unit cover if your motherboard is already in stalled in a chassis. This field shows the status of the User Password. Installing an expansion card Step 1.
This is necessary so that you can write or read data from the hard disk. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. This field shows the status of the Supervisor Password.
The default is Align the card connector with the slot and press firmly until the card is completely asrok on the slot. This automatically activates the Numeric Lock function after boot up.
Also, for proper operation, it is not recommended to use two different brands of the DIMMs at the same time.
ASRock K7VT2 – motherboard – ATX – Socket A – KTA Overview – CNET
Valid password can be a 1 to 6 alphanumeric characters combination. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. Carefully insert the CPU into the socket until it fits in place. Hold components by the edges and do not touch the ICs. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Refer to the drive documentation to determine the correct values.
All changes are discarded.